WHY ARE YOU GRINDING?
Realizing what you need as a final product will be a standout amongst essential viewpoints to make sense of before you begin. The purpose behind this is on the grounds that you should take after an alternate procedure relying upon what you’re hoping to accomplish. For instance, in case you’re needing to put down a self-levelling covering, you’ll have to know the correct details of how the solid should be arranged with the goal that the covering can follow legitimately.
Or, on the other hand say you as of now have a covering on the solid and are searching for a cleaned solid wrap up; the covering initially is clearly important yet in the event that you utilize tooling that is excessively forceful, you may leave checks in the solid that are exceptionally hard to get out, which will wreck the look of the cleaned concrete.
Golvslipning Stockholm www.golvslipningistockholm.se
Dominant part of coatings accessible need some kind of profile to hold fast appropriately to the solid. “Profile” alludes to the surface or harshness of the solid. A few coatings require a mellow surface or harshness, while others require a more forceful one. In the event that you are anticipating utilizing a covering to accomplish the completed look you need, the covering producer will state what sort of profile you will require before applying the covering. Contingent upon where you live, the profile arrangements will be unique. When you realize what sort of profile is required for your covering of decision, it’s a smart thought to do some exploration and see what sort of processor tooling you’ll have to accomplish that particular profile. A processor will have a wide range of tooling sorts accessible with a specific end goal to get distinctive profiles. We’d recommend asking the rental house you get your processor from about which tooling you’ll require. They will probably have the pertinent tooling accessible, and will comprehend which tooling is best for the processor you’re utilizing, to accomplish different profiles.
Cleaned concrete is an awesome approach to refresh the look of a solid section, yet for those with no pounding or cleaning knowledge it can be somewhat of an undertaking. Before you focus on cleaning your piece, ensure you investigate what the procedure really requests. For a tenderfoot, it can overwhelm and simple to commit errors as there are different strides of crushing and synthetic application, to accomplish the correct cleaned wrap up.
There are some floor frameworks that make it less demanding. You’ll see that cleaning concrete requires somewhat more foundation information and is a procedure that is more mind boggling than some epoxy paints or other completing coatings.
When you comprehend what you need to do with your solid you can start shopping. Most rental houses will have single-head or multi-head processors accessible for you to look over. On the off chance that you are doing a littler DIY venture or preparing the surface for a covering, a solitary head processor should suit your necessities. On the off chance that you are doing a greater section as well as cleaning solid, you’ll need a mulit-head planetary processor, to guarantee the correct wrap up.
With regards to tooling, you ought to comprehend what profile you’re searching for, or what material you are hoping to evacuate before picking the tooling. Converse with the rental house get your processor from, they ought to have the capacity to propose the privilege tooling for your activity. Try to let them know precisely what the present circumstance of your solid is (pictures can be useful) and what your ultimate objective is. Various organizations will convey distinctive tooling utilized for a similar reason, so it’s imperative to do a little research of what they are recommending also. Look online for client evaluations or audits on the off chance that you have a feeling that you have to.
The way toward granulating is a considerable measure less demanding than cleaning. The primary concern to remember is to ensure that you are accomplishing an even look as you crush along the solid. To granulate, keep a predictable “swinging” movement with the processor, from left and appropriate over the piece as you push ahead. You would do this for covering expulsion, making a profile, or starting the cleaning procedure. Much the same as sanding paint off a bit of old furniture, once the solid looks “cleaned” you can push ahead.
Try not to go over a specific territory of the floor for a really long time. Toning it down would be best, to begin. When you pound excessively, there is no backpedaling. You can simply return and granulate down more after if necessary.
On the off chance that you were simply pounding the floor to evacuate a covering to put another down, you’re crushing procedure is done once you have accomplished the profile required for the new covering. Take after the directions from the maker and you will wind up with a wonderful new floor
In case you’re cleaning, keep following the floor framework guidelines and pounding steps. In a matter of moments, you will have a cleaned solid section that gives the space a radical new look.